How many straps per charge?

It depends on the model, battery capacity, strap and tension. Ask us about the model in stock.

No. The joint is a friction weld, so you save the cost of seals entirely.

Both, within the model's width and thickness range.

Go by the strap width you use. For mostly 16 mm either works; for 19 mm choose 16/19.

Battery Strapping Tools for PP & PET Strap

Insert the strap
Loop the strap around the package and lay both ends in the tool.
Press tension
The tool pulls to the tension you set.
Press weld
It friction-welds the ends and cuts off the excess.
Lift the tool
The strap is done, with no seal.

Item	Specification
Strap type	PP and PET
Strap width	13–16 mm or 16–19 mm, depending on model
Joint	Friction weld, no seal
Battery	Rechargeable lithium with charger
Controls	Adjustable tension and weld time

Specifications vary by model. Ask us which model is in stock and its exact specs.

Charge the battery fully before first use, and don't leave it flat for long periods.
Clean strap debris off the tension wheel; if it clogs, the strap will slip.
If welds are weak, raise the weld time a little rather than the tension.